Part
Number: 33-330-085 (previously
sold as 33-320-057 and
33-330-057)
|
Description: Neo-Flex Dual LCD Lift
Stand (two-toned grey)
|
Includes stand, crossbar, two (2)
sliding monitor brackets, manual,
VESA-monitor mounting kit, cable
ties |
† Maximum outside width of
display is 21.25" (54 cm) when
displays are 2" (5 cm) thick.
This is typically the
horizontal dimension of a
22"-diagonal screen-size
monitor. Actual allowable width
of displays will vary slightly
depending on display thickness |
*Weight Capacity: 14–34 lbs
(6.4–15.4 kg) total. Note: Monitors
must be equal in weight or +/-1
pound (.45 kg)
|
Mounting Standards: VESA FDMI MIS-D,
100/75, C (hole pattern: 100 x 100
mm & 75 x 75 mm)
|
Maximum LCD outside width is 22" (56
cm)
|
Everything
is included to neatly route cables
behind the stand, out of the way |
Tested
in compliance to UL specification
1678 tip stability test
|
Install displays at 3.5° or 8.5°
upward angle for optimized viewing
conditions
|
Monitors are installed with 8°
inward off-set angle, creating a 16°
viewing parabola for better sight
lines |
Shipping Dimensions: 24.4" x 16.8" x
8.8" (620 x 426 x 224 mm)
|
Shipping Weight: 18.3 lbs (8.3 kg)
|
Warranty: Three (3) years
|